카페검색 본문
카페글 본문
-
용어사전 (F 항목) 2002.08.02해당카페글 미리보기
압력에 의해 발생하는 도체 회로의 파괴로 주어진 굴곡 압력에 대해 특정 시간 동안의 저항력 증가치로 표시한다. ▶Flexural Strength(굴곡 강도) 굴곡 압력(Stress)이 가해졌을 때 PCB나 적층 원판이 버틸 수 있는 강도로 굴곡 강도치는 적층 원판의...
-
각종 플라스틱,사출성형기 등에 관련된 전문자료 2009.01.06해당카페글 미리보기
Properties) 경도(Hardness) 내마찰·내마모성( Abrasion resistance / Wear resistance) 굴곡특성(Flexural Properties) 충격강도(Impact strength) 2.물리적 성질 성형수축율(Mold shrinkage) 유동성 비중 HAZE(운가) 3.열적 성질 열변형온도(HDT : Heat...
-
[논문] 슬래그 모래특성에 따른 모르터의 강도에 관한 연구 2012.04.25해당카페글 미리보기
When air-cooled furnace slag sand used in mortar, as substitution rate is higher, 3,7-days compression strength and flexural strength are going up. But, in case of water-cooled furnace slag sand mortar, strength are going down. 수록지...
-
트레스파 외벽판넬 ( TRESPA CLADDING SYSTEM) 2004.04.01해당카페글 미리보기
안정성에 영향을 주지 않습니다. ▶ 먼지 등이 들러 붙지 않고 청소는 쉬운 일 입니다. 낙서의 기회도 주지 않습니다. flexural strength와 elasticity가 조합되어 웬만한 충격에도 끄덕 없습니다. ▶ 미테온은 웬만한 유기용제면 그 감동적인 색상에 전혀...
-
관심있으신분.... 2002.05.23해당카페글 미리보기
18.6kg/㎠) --- 95 °C Heat Distortion Temperature(ASTM D 648, 4.6kg/㎠) --- 120 °C Tensile Strength(ASTM D 638) --- 480kg/㎠ Flexural Strength(ASTM D 790) --- 780kg/㎠ 2)Poly Urethane Tire 경 도 ---------- 78A-90A 탄 성 률...
-
Direct Composite Resin Restorations in Posterior Teeth 2008.03.20해당카페글 미리보기
stress, the microfilled composite resins tend to fracture because of low modulus of elasticity and low flexural and compressive strength. This is revealed through fractures of the marginal ridges, localized wear in areas of centric...
-
[논문] 각국 표준 규격에 따른 시멘트 강도 비교실험 2012.04.25해당카페글 미리보기
on the compressive strength of various countries, we have compared the testing results of the compressive and flexural strength, one of the most important properties of cement, obtained on the various standards(KS, JIS, BS, ASTM) and the...
-
트레스파 외벽판넬 ( TRESPA CLADDING SYSTEM) 2004.06.02해당카페글 미리보기
안정성에 영향을 주지 않습니다. ▶ 먼지 등이 들러 붙지 않고 청소는 쉬운 일 입니다. 낙서의 기회도 주지 않습니다. flexural strength와 elasticity가 조합되어 웬만한 충격에도 끄덕 없습니다. ▶ 미테온은 웬만한 유기용제면 그 감동적인 색상에 전혀...
-
CHOPPED FIBER 2010.02.18해당카페글 미리보기
LEVEL % 2.5±0.5 BULK DENSITY g/L 400minimum HTA-C6-UEL1 HTA-C6-US(CONTROL) TENSILE STRENGTH(MPA) TENSILE MODULUS(GPA) FLEXURAL STRENGTH(MPA) FLEXURAL MODULUS(GPA) IZOD IMPACT VALUE(J/M) NOTCHED UNNOTCHED VOLUME RESISTIVITY( CM) 170 20...
-
Rigid-Flex Boards for Space Packaging Take Flight 2005.08.10해당카페글 미리보기
failures. The inherent properties of the polyimide film like high heat resistance, dimensional stability, dielectric strength and flexural capability, enables the fabricated MLB to maintain a high degree of durability and to survive...