카페검색 본문
카페글 본문
-
M23 Female Square flange Mount Recpt Front Mounting+wire 2019.12.21해당카페글 미리보기
Coded Connector Style M23, Square flange Mount Recpt, Front Mounting+Wire Termination Screw connection Wire gauge 2.5 mm2 / (14/18 AWG) Cable OD 2.5mm IP Rating IP67 Mechanical operation >100 Torque 0.4 Nm (M12 knurl) 0.8 Nm ... 1 Nm...
-
Aurex(오렉스) SR-P90 턴테이블 2023.11.08해당카페글 미리보기
order to achieve high sensitivity, pivot bearings are used in the vertical direction and underground contact bearings are used in the horizontal direction. In addition, aluminum alloy die-cast is used for the head shell, and miniature...
-
The Melni Connector Story 2013.06.05해당카페글 미리보기
enables electricians and linemen to quickly spot a faulty connector by allowing them to look at the copper insert...polycarbonate body (standard connector is black). The wire is saved when replacing a connector: Simply cut the connector...
-
3:1 바룬 2023.03.11해당카페글 미리보기
tape to protect the enamelled copper wire from insulation puncture from abrasion with the toroid core. As this Balun...the weather a weatherproof plastic enclosure is used. See photos 1,2 and 3. The entry holes for the SO-239 connector...
-
씨엔플러스 가격조정이 심하여 단기적인 반등을 기대할 수는 있으나, 씨엔플러스 추가적인 하락추세가 발생할 확률이 높아 보이는 패턴입니다. 2022.12.23해당카페글 미리보기
종류에 따라 Board to Board, Wire to Board, FPC/FFC, I/O 커넥터 등으로 구분되어지며, FPC/FFC 및 I/O 커넥터, Wire to Board Connector 판매 비중이 높습니다. 초기 PDP패널용 커넥터 시장진입을 시작으로 사업영역을 확대하여 LCD/OLEDTV, ODD, 2...
-
커넥터 좀 찾아 주세요~^^;;; 2007.03.08해당카페글 미리보기
감기 조심하세요~ Connector를 수배하다 도저히 못 찾아 이렇게 문의 드립니다^^;;; Wire to PCB Connector이구요~ PCB에 안착되는 Connector가 필요 합니다. Connector가 내부에 있어 보이진 않지만 첨부 된 사진 확인 바라며 아시는 업체 또는 샘플 구입...
-
수리법 강의 (아주 훌륭함)-퍼옴 2007.10.23해당카페글 미리보기
s different jaw sizes for different size connector pins. The "C", "D", and "E" pockets are used to crimp the bare wire to the Molex connector pin. These pockets cause the end of the pin's wire grip wings to curl over and dive into the...
-
리그와 컴퓨터 (타블렛피시,스마트폰) 연결 (wifi)사용 2012.11.08해당카페글 미리보기
in half and thread a piece of tubing over each wire of the 9V connector. Twist the exposed wire on the jumper wire to the 9V connector wire. Ensure you match red to red and black to black. Solder the wires together. Slide the shrink...
-
아직 메뉴얼은?/ 2006.03.26해당카페글 미리보기
on the Composite unit (RX-TX) on the bottom of the transceiver. Carefully strip 1/8 inch insulation from wire attached to pin 2 connector 12 approximately ¼ inch from the connector (do not break the wire). Solder the 3 components...
-
하향헤드라이트 쌍발로 만드는방법 입니다.. ^^ 2007.12.06해당카페글 미리보기
net. My username is Gand. What you need 1 wire tap that can take 14-gauge wire 3 feet or so of 14-gauge wire (stranded) 1 connector to hook to the blade on the headlamp holder. You may have to experiment with this one, but there are lots...