카페검색 본문
카페글 본문
-
[제동 설계] 브레이크 기초 (1) - 페달 2023.10.30해당카페글 미리보기
장치 (Hydraulic Brake system) 는 크게 페달, 밸런스 (바이어스) 바, 마스터 실린더, 브레이크 부스터, 캘리퍼, 그리고 디스크 로터 등으로 구성됩니다. 운전자가 브레이크 페달에 힘을 가하면, 마스터 실린더 내부의 피스톤이 비압축성 유체를 통해 압력...
-
Rotary Kiln 2023.10.11해당카페글 미리보기
hollow cylinder, mounted in an inclined position on rolls and rotated slowly by a drive. The charge material moves from the feed end to the discharge end as a result of the rotary motion and gravity. The inclination of the kiln is...
-
Painting Specification 2023.09.22해당카페글 미리보기
Torque Cylinder Liner NO PAINT - Feed End Inner Drum Liner NO PAINT - Water Tank Indoor Dusty Ambi-ent SA2.5 PRIM Alkyd Zink-Chromate Paint 1 50 6010(7.5GY4.5/8) (Outside Surface) MID Alkyd Finish Paint 1 50 FIN Alkyd Finish Paint 1 50...
-
23-37 정 2023.09.12해당카페글 미리보기
and hydraulic systems. Specific chassis suppliers remain confidential due to trade secrets, although it is worth noting that one of the manufacturers involved is a purely Slovak company. In alignment with the broader goals of the Bia...
-
ID FAN 2023.07.26해당카페글 미리보기
oil at a constant pressure to the proportional valve. From the proportional valve the hydraulic oil is directed to a hydraulic cylinder which actuates the mechanical components of the pitch control system, thereby changing the angle of...
-
FEED WATER PUMP 2023.07.25해당카페글 미리보기
펌프 Hydraulic Channels에서 일정 유동분포를 유지할 수 있으며 유동에 안정성을 공급한다. 다. 케이싱 급수펌프의 케이싱은 고압이므로 이중 케이싱을 사용하며, 원통형의 배럴에 내부 케이싱이 축, 회전차 및 기타 회전체를 감싸는 구조로 되어 있다...
-
TVN시험문제 2023.07.21해당카페글 미리보기
② Cylinder와 Wire Mesh Screen으로 구성되어 있다. ③ 외측의 Coarse Mesh Screen은 Fine Mesh Screen을 보호하기 위한 것이다. ④ 두번째 Fine Mesh Screen은 정상운전시 이물질을 걸러내기 위한 것이다. 4. 주증기 Valve의 Stem과 Bushing등에 고착...
-
TBN설치기술 2023.07.13해당카페글 미리보기
밀폐형 CYLINDER 형식으로 고정자는 냉각수로 냉각되며, 회전자는 수소가스에의해 냉각되는 2극 3상으로 고정자와 회전자는 분리하여 공급된다. 2. TBN/GEN 설비의 특성 1) TBN 설비의 특성 가) ROTOR ROTOR는 1개의 HIP ROTOR와 2개의 LP-A, B ROTOR로...
-
MAIN TBU 계통 2023.06.01해당카페글 미리보기
열기 위해 Stop Valve Seat 하단부에 압력을 가하며, 밸브 전 후의 압력차가 정격 압력의 13%에 이르면 유압 실린더(Hydraulic Cylinder)는 밸브 디스크를 열 수 있다. 나머지 세 Stop Valve는 내부에 우회 밸브가 없으며 완전 닫힘 또는 완전 개방만 한다...
-
미국에서 내 자동차 구입기-6(마지막편) 2023.05.10해당카페글 미리보기
원인은 Cylinder Head Cover를 열고 확인했을 때 #4 Cyl. Rocker arm and push rod defected.(4번 실린더 쪽 Rocker arm Shaft 와 Rocker arm을 밀어주는 Push-rod 부품에 문제가 발생되었고, 이로 인해 연료가 연소 되지못하고 실린더 쪽으로 흘러서 엔진...