카페검색 본문
카페글 본문
-
바노스 오링 교체 방법 좋은글 있어서 공유해요^^ 2015.05.22해당카페글 미리보기
extension). Loosen cylinder 3 coil mounting bolts as needed to move coil to side to facilitate tool access. Retighten cylinder 3 coil mounting bolts. New design coil / coil harness installation Install each coil into original sparkplug...
-
IRP XRAY용 Tweak Plate 2006.06.25해당카페글 미리보기
Step 2 Take the 4 standoff screws and bolt the chassis to the plate. Step 3 Loosen all top deck screws and bulk head screws and then retighten. Step 4 Remove standoffs and go race!!! 성능은 아니고 뽀대용 같습니다. 출처: http://rcforum.co.kr
-
쇽 조립에 대하여.... 2006.11.28해당카페글 미리보기
and then slightly push the shock rod into the shock body. Excess oil should escape out the top of the shock. Retighten the top collar and retest. Repeat bleeding as required. The shock rod should not be drawn into the shock body when...
-
퍼옴] 페이져 정비시 부위별 조임토크 2011.02.14해당카페글 미리보기
2.8 20 Passenger footrest bracket and muffler M10 48 4.8 35 Note: 1. First, tighten the ring nut to approximately 52 Nm (5.2 m-Kg, 38 lb-ft) with a torque wrench 2. Loosen the ring nut completely 3. Retighten the ring nut to specification
-
페트로막스 랜턴 사용설명서 2008.02.15해당카페글 미리보기
Photo 1)DO NOT OVERFILL ... tilt the lantern 15 degrees with cap off, ....if no fuel pours out of it, then you're o.k. Retighten the gauge and the pressure release valve(#13) See photo below 8A. Photo 1 Photo 2 4. Tying or replacing the...
